I apologize in advance if this is something I should have found without asking. It seems the mailing list isn't searchable, and I couldn't find this addressed anywhere else.
I've run mrtg for around 6 years or so, and I've run into my first difficulty. I'm graphing amp loads on the various legs of our Liebert series 300 UPS. I obtained the OIDs by digging through their mib and through snmpwalking. The OIDs are good, and the data obtained from a manual snmpget is consistent with the data at the top of the log files. Here's a sample config: Target[5_2]: .1.3.6.1.4.1.476.1.1.1.1.4.4.1.3.1&.1.3.6.1.4.1.476.1.1.1.1.4.4.1.3.1:[EMAIL PROTECTED]: MaxBytes[5_2]: 1000 Title[5_2]: Liebert DC UPS1 - Amps on Leg 1 YLegend[5_2]: Amps ShortLegend[5_2]: A Legend1[5_2]: Amps Legend2[5_2]: Amps Legend3[5_2]: Max Amps Legend4[5_2]: Max Amps PageTop[5_2]: <H1>Liebert DC UPS1 - Amps on Leg 1</H1> <TABLE> <TR><TD>System:</TD> <TD>Liebert DC UPS1 in Frederick NOC</TD></TR> <TR><TD>Description:</TD><TD>Liebert UPS Leg 1 Amp Usage </TD></TR> </TABLE> And here's the top of the log file: 1047508264 2 2 1047508264 0 0 0 0 1047508244 0 0 0 0 (etc) Yet, when I look at the graphs, I get nothing but 0s regardless. Any ideas why? Could it have something to do with the fact that regardless of the number of samples (been running for a few hours now), the only line with any data is the top of the log? And if so, what could be causing that? Thanks, Andy xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Andy Dills 301-682-9972 Xecunet, LLC www.xecu.net xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx Dialup * Webhosting * E-Commerce * High-Speed Access -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
