When you run cfgmaker, try adding the --global "options[_]: bits" option. 193K is 193KBytes. Multiply that by 8bits and you get 1.544Kbits (T-1)
-------- Original Message -------- Subject: [mrtg] MRTG and Cisco 3640 From: "Scott Miller" <[EMAIL PROTECTED]> Date: Tue, March 25, 2003 4:25 pm To: <[EMAIL PROTECTED]> > I have MRTG installed on my up2date RedHat 7.2 box - but the graphs seem > to be coming out wrong. I've ran the configmaker, and it found my > router and all the ports, but reports that my two serial (T-1) ports are > only running at 193K each. They should be a full 1.545MB each. Is this > something that needs to be re-configured within MRTG, or something I > need to look at on my router? > > Thanks > Scott Miller > > -- > Unsubscribe mailto:[EMAIL PROTECTED] > Archive http://www.ee.ethz.ch/~slist/mrtg > FAQ http://faq.mrtg.org Homepage http://www.mrtg.org > WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
