Sounds like you are looking at Bytes per second instead of bits per second. If you want to use configmaker add this to the command line:
--global 'Options[_]: bits' Or just edit the conf, add "bits" to the options, global or per instance. -Mike -----Original Message----- From: Scott Miller [mailto:[EMAIL PROTECTED] Sent: Tuesday, March 25, 2003 5:26 PM To: [EMAIL PROTECTED] Subject: [mrtg] MRTG and Cisco 3640 I have MRTG installed on my up2date RedHat 7.2 box - but the graphs seem to be coming out wrong. I've ran the configmaker, and it found my router and all the ports, but reports that my two serial (T-1) ports are only running at 193K each. They should be a full 1.545MB each. Is this something that needs to be re-configured within MRTG, or something I need to look at on my router? Thanks Scott Miller -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
