Today Evan Platt wrote: > At 06:56 AM 03/27/2003, you wrote: > >Hello colleagues, > > > >I want to measure the bandwidth utilization for an ADSL interface. Since > >ADSL by nature has different up/down speeds, I wonder how to measure in and > >out traffic using different speeds for each. Does anybody know what the > >config file for this would look like ? > >Thanks in advance for your help. > > I've inquired about this before - mrtg is designed to do Synchronous > connections. Nothing you can do in the config file (or nothing you need to > do). You'll simply have a large green line for downloads, and a small peak > for upload (depending on the ratio of your upload to download - I have > 1.5/128 so my upload line is barely visible.)
you can define two maxbytes values ... tobi > > Evan > > -- > Unsubscribe mailto:[EMAIL PROTECTED] > Archive http://www.ee.ethz.ch/~slist/mrtg > FAQ http://faq.mrtg.org Homepage http://www.mrtg.org > WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi > -- ______ __ _ /_ __/_ / / (_) Oetiker @ ISG.EE, ETZ J97, ETH, CH-8092 Zurich / // _ \/ _ \/ / System Manager, Time Lord, Coder, Designer, Coach /_/ \.__/_.__/_/ http://people.ee.ethz.ch/~oetiker +41(0)1-632-5286 -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
