Below is a sample of my main cfg that calls other cfgs. I do not know about 
mrtg-rrd. I use routers2.cgi which I really like.
Hope this helps

####################################################
WorkDir: C:\inetpub\wwwroot\mrtg

LogFormat: rrdtool
Logdir: C:\Inetpub\wwwroot\mrtg

##### change dirs as needed versions etc etc ####
PathAdd: C:/mrtg/bin
PathAdd: C:/rrdtool/perl-shared
PathAdd: C:/rrdtool/perl-shared/t
PathAdd: C:/rrdtool/src/tool_release
LibAdd: C:/rrdtool/perl-shared/
LibAdd: C:/mrtg/bin

### Global Config Options

Options[_]: growright, transparent

###############################################################################################
#                                                                               
              #
#                                                                               
              #
# The mother of all config files!!!!                                            
              #
#                                                                               
              #
#                                                                               
              #
###############################################################################################

Include: C:\mrtg\bin\Northfield\tr_3com_Switches.cfg
Include: C:\mrtg\bin\Northfield\tr_ipbx1.cfg
Include: C:\mrtg\bin\Northfield\tr_ipbx2.cfg
Include: C:\mrtg\bin\Northfield\tr_ipbx3.cfg
Include: C:\mrtg\bin\Northfield\tr_sgeart1.cfg
Include: C:\mrtg\bin\Northfield\hqter2_Intel_Team.cfg
# Include: C:\mrtg\bin\Northfield\cisco_2600.cfg
Include: C:\mrtg\bin\Northfield\tr_pingprobe.cfg
Include: C:\mrtg\bin\Denver\cr_denverpbx.cfg
Include: C:\mrtg\bin\Northfield\SERVERS_CPU.cfg
Include: C:\mrtg\bin\Northfield\NF_Cisco_1720.cfg
Include: C:\mrtg\bin\Denver\DV_Cisco_1720.cfg
Include: C:\mrtg\bin\KY\KY_Cisco_1720.cfg
Include: C:\mrtg\bin\Phoenix\Pho_Cisco_1720.cfg
Include: C:\mrtg\bin\Austin\Aus_Cisco_1720.cfg
#Include: C:\mrtg\bin\Northfield\HQBB_HTTP.cfg


RunAsDaemon: yes
Interval: 5





-----Original Message-----
From: Baker, Brendon [mailto:[EMAIL PROTECTED]
Sent: Wednesday, April 02, 2003 7:57 AM
To: '[EMAIL PROTECTED]'
Subject: [mrtg] rrdtool and multiple config files


Hi everyone

Another question:

What is the right syntax to have multiple cfg's included into one cfg when
you are using just mrtg

Also........how will this work when using mrtg-rrd
(http://www.fi.muni.cz/~kas/mrtg-rrd/)

Thanks for your help

Regards
Brendon

___________________________________________________________________________________________________


The views expressed in this email are, unless otherwise stated, those of the 
author and not those
of the FirstRand Banking Group or its management.  The information in this 
e-mail is confidential
and is intended solely for the addressee. Access to this e-mail by anyone else 
is unauthorised. 
If you are not the intended recipient, any disclosure, copying, distribution or 
any action taken or 
omitted in reliance on this, is prohibited and may be unlawful.
Whilst all reasonable steps are taken to ensure the accuracy and integrity of 
information and data 
transmitted electronically and to preserve the confidentiality thereof, no 
liability or 
responsibility whatsoever is accepted if information or data is, for whatever 
reason, corrupted 
or does not reach its intended destination.

                               ________________________________

--
Unsubscribe mailto:[EMAIL PROTECTED]
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

--
Unsubscribe mailto:[EMAIL PROTECTED]
Archive     http://www.ee.ethz.ch/~slist/mrtg
FAQ         http://faq.mrtg.org    Homepage     http://www.mrtg.org
WebAdmin    http://www.ee.ethz.ch/~slist/lsg2.cgi

Reply via email to