Ok I have made the following SNMPD.conf Then I ran Snmp which is working fine.
Now I ran the CFgmaker and got the following Mrtg.cfg file. I think it ran properly. Now the problem is that when I give the command /usr/bin/mrtg /etc/mrtg/mrtg.cfg I get the following error a number of times. Malformed UTF-8 character (unexpected non-continuation byte 0x20, immediately after start byte 0xe2) at /usr/bin/../lib/mrtg2/locales_mrtg.pm line 4051. with each time modification in start byte Hope you could help me out. ########################################################################### # # snmpd.conf # # - created by the snmpconf configuration program # ########################################################################### # SECTION: Access Control Setup # # This section defines who is allowed to talk to your running # snmp agent. # rwcommunity: a SNMPv1/SNMPv2c read-write access community name # arguments: community [default|hostname|network/bits] [oid] rwcommunity public 192.168.0.213 rwcommunity public 192.168.0.0 / 24 rwcommunity public 127.0.0.1 ########################################################################### # SECTION: Monitor Various Aspects of the Running Host # # The following check up on various aspects of a host. # load: Check for unreasonable load average values. # Watch the load average levels on the machine. # # load [1MAX=12.0] [5MAX=12.0] [15MAX=12.0] # # 1MAX: If the 1 minute load average is above this limit at query # time, the errorFlag will be set. # 5MAX: Similar, but for 5 min average. # 15MAX: Similar, but for 15 min average. # # The results are reported in the laTable section of the UCD-SNMP-MIB tree load 12 12 12 ########################################################################### # SECTION: System Information Setup # # This section defines some of the information reported in # the "system" mib group in the mibII tree. # syslocation: The [typically physical] location of the system. # arguments: location_string syslocation PGRLAB # syscontact: The contact information for the administrator # arguments: contact_string syscontact "Saqib bin Sohail" # sysservices: The proper value for the sysServices object. # arguments: sysservices_number sysservices 79 # Created by # /usr/bin/cfgmaker --global 'WorkDir: /var/www/html/mrtg/30003' --global 'Options[_]: growright,bits' --ifref=ip [EMAIL PROTECTED] ### Global Config Options # for UNIX # WorkDir: /home/http/mrtg # or for NT # WorkDir: c:\mrtgdata ### Global Defaults # to get bits instead of bytes and graphs growing to the right # Options[_]: growright, bits WorkDir: /var/www/html/mrtg/30003 Options[_]: growright,bits ###################################################################### # System: firewall.uet.edu.pk # Description: Linux firewall.uet.edu.pk 2.4.18-14 #1 Wed Sep 4 13:35:50 EDT 2002 i686 # Contact: "Saqib bin Sohail" # Location: PGRLAB ###################################################################### ### Interface 1 >> Descr: 'lo' | Name: '' | Ip: '127.0.0.1' | Eth: '' ### ### The following interface is commented out because: ### * it is a Software Loopback interface # # Target[192.168.0.213_127.0.0.1]: /127.0.0.1:[EMAIL PROTECTED]: # SetEnv[192.168.0.213_127.0.0.1]: MRTG_INT_IP="127.0.0.1" MRTG_INT_DESCR="lo" # MaxBytes[192.168.0.213_127.0.0.1]: 1250000 # Title[192.168.0.213_127.0.0.1]: Traffic Analysis for 127.0.0.1 -- firewall.uet.edu.pk # PageTop[192.168.0.213_127.0.0.1]: <H1>Traffic Analysis for 127.0.0.1 -- firewall.uet.edu.pk</H1> # <TABLE> # <TR><TD>System:</TD> <TD>firewall.uet.edu.pk in PGRLAB</TD></TR> # <TR><TD>Maintainer:</TD> <TD>"Saqib bin Sohail"</TD></TR> # <TR><TD>Description:</TD><TD>lo </TD></TR> # <TR><TD>ifType:</TD> <TD>softwareLoopback (24)</TD></TR> # <TR><TD>ifName:</TD> <TD></TD></TR> # <TR><TD>Max Speed:</TD> <TD>10.0 Mbits/s</TD></TR> # <TR><TD>Ip:</TD> <TD>127.0.0.1 (localhost.localdomain)</TD></TR> # </TABLE> ### Interface 2 >> Descr: 'eth0' | Name: '' | Ip: '192.168.0.213' | Eth: '00-c0-26-60-f7-44' ### Target[192.168.0.213_192.168.0.213]: /192.168.0.213:[EMAIL PROTECTED]: SetEnv[192.168.0.213_192.168.0.213]: MRTG_INT_IP="192.168.0.213" MRTG_INT_DESCR="eth0" MaxBytes[192.168.0.213_192.168.0.213]: 1250000 Title[192.168.0.213_192.168.0.213]: Traffic Analysis for 192.168.0.213 -- firewall.uet.edu.pk PageTop[192.168.0.213_192.168.0.213]: <H1>Traffic Analysis for 192.168.0.213 -- firewall.uet.edu.pk</H1> <TABLE> <TR><TD>System:</TD> <TD>firewall.uet.edu.pk in PGRLAB</TD></TR> <TR><TD>Maintainer:</TD> <TD>"Saqib bin Sohail"</TD></TR> <TR><TD>Description:</TD><TD>eth0 </TD></TR> <TR><TD>ifType:</TD> <TD>ethernetCsmacd (6)</TD></TR> <TR><TD>ifName:</TD> <TD></TD></TR> <TR><TD>Max Speed:</TD> <TD>10.0 Mbits/s</TD></TR> <TR><TD>Ip:</TD> <TD>192.168.0.213 ()</TD></TR> </TABLE> ### Interface 3 >> Descr: 'eth1' | Name: '' | Ip: '172.16.0.1' | Eth: '00-c0-26-60-f2-32' ### Target[192.168.0.213_172.16.0.1]: /172.16.0.1:[EMAIL PROTECTED]: SetEnv[192.168.0.213_172.16.0.1]: MRTG_INT_IP="172.16.0.1" MRTG_INT_DESCR="eth1" MaxBytes[192.168.0.213_172.16.0.1]: 1250000 Title[192.168.0.213_172.16.0.1]: Traffic Analysis for 172.16.0.1 -- firewall.uet.edu.pk PageTop[192.168.0.213_172.16.0.1]: <H1>Traffic Analysis for 172.16.0.1 -- firewall.uet.edu.pk</H1> <TABLE> <TR><TD>System:</TD> <TD>firewall.uet.edu.pk in PGRLAB</TD></TR> <TR><TD>Maintainer:</TD> <TD>"Saqib bin Sohail"</TD></TR> <TR><TD>Description:</TD><TD>eth1 </TD></TR> <TR><TD>ifType:</TD> <TD>ethernetCsmacd (6)</TD></TR> <TR><TD>ifName:</TD> <TD></TD></TR> <TR><TD>Max Speed:</TD> <TD>10.0 Mbits/s</TD></TR> <TR><TD>Ip:</TD> <TD>172.16.0.1 ()</TD></TR> </TABLE> On Mon, 2003-04-07 at 11:13, Kashif Hameed wrote: > salam man what kind of help ui want tell me if i know it i will give u step > by step instructionok > recently i have done mrtg for my serial and ehternet link > by the way i am from lahore if u wana contact me reagardinhg help u can call > me 03334287563 ok > > > -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
