For some reason when I am running cfgmaker everything works okay.. but when I set up the system to poll with mrtg /mrtg/mrtg.cfg only one of the systems are updating. Now I would like to poll a total of three seperate systems. One is a simple router that polls no problem(however would like to get the two interfaces on that box to output to a single graph.) the second is a cisco with polls okay also would like to combine the Serial0.1 and Serial0 interfaces to the same graph. And the final is a Ascend Max 4002 that I have not been able to get to poll as of yet. Something about MIBs, which I am still reading on. anyway, the cfgmaker command I am using is ./cfgmaker --descint --subdirs \ --global 'WorkDir: /mrtg' \ --global 'Options[_]: bits,growright' \ --output /mrtg/mrtg.cfg \ [EMAIL PROTECTED] \ [EMAIL PROTECTED]
this don't include the Ascend though.. since it fails the walk. Now when I run this command, the polling works fine for the 192.168.1.1 but don't update the 192.168.0.1 ?? Suggestions ===== o----------------------------------------------------o | The only possible interpretation of any | | research whatever in the "social sciences" | | is: some do, some don't. | | | | -Ernest Rutherford | o----------------------------------------------------o __________________________________________________ Do you Yahoo!? Yahoo! Tax Center - File online, calculators, forms, and more http://tax.yahoo.com -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
