The RRDTool documentation is somewhat confusing, but you might want to look at the 'create' document. The "Duration" is set when you create each RRA that is located in a RRD. Below is a link to some documentation that I created for our company. http://www.vvm.com/~fluhmann/mrtg/mrtgdoc.doc I'm working on a revision for public use (currently, it documents how to configure to McLane Company specifications). You may want to look at the section "Sizing RRDs" and see if that might help some. Once you get the calculations figured out, you can set the "duration" for however long you want. You might also check out the RRD_calculator at the NMIS site: http://www.sins.com.au/nmis/rrd_calc.xls
You enter how long you want to keep the data, and it gives you the code. Good Luck! Jeremy Fluhmann > Where do you configure the "Duration" for how long the Data (for > different intervals) would be kept ? > > Regards \\ Naman -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
