What version of SNMP are you running on your Redhat 8 and 9 machines? On my Redhat 9 machine I'm trying to use cfgmaker to create a configuration for monitoring a Cisco router, and cannot get it to find my interfaces by IP description (what I want), name, or IP address, apparently because the SNMP queries gathering that information are returning garbage.
I think the problem is with the SNMP query itself (or how the response is processed by the Redhat 9 SNMP), rather than a problem with the Cisco SNMP, because on Redhat 7.3, the same command using the same MRTG version works fine: [EMAIL PROTECTED] root]# cfgmaker --ifref=descr --global "Options[_]: growright,bits" --global "WorkDir: /var/www/html/mrtg" [EMAIL PROTECTED] > test.cfg --base: Get Device Info on [EMAIL PROTECTED]: --base: Vendor Id: cisco --base: Populating confcache --snpo: confcache [EMAIL PROTECTED]: Name Et0 --> 1 --snpo: confcache [EMAIL PROTECTED]: Name Et1 --> 2 --snpo: confcache [EMAIL PROTECTED]: Name Se0 --> 3 --snpo: confcache [EMAIL PROTECTED]: Name Se1 --> 4 --snpo: confcache [EMAIL PROTECTED]: Descr Ethernet0 --> 1 --snpo: confcache [EMAIL PROTECTED]: Descr Ethernet1 --> 2 --snpo: confcache [EMAIL PROTECTED]: Descr Serial0 --> 3 --snpo: confcache [EMAIL PROTECTED]: Descr Serial1 --> 4 --snpo: confcache [EMAIL PROTECTED]: Ip 10.1.5.2 --> 4 --snpo: confcache [EMAIL PROTECTED]: Ip 10.1.7.2 --> 3 --snpo: confcache [EMAIL PROTECTED]: Ip 10.3.3.1 --> 1 --snpo: confcache [EMAIL PROTECTED]: Type 6 --> 1 --snpo: confcache [EMAIL PROTECTED]: Type 6 --> 2 (duplicate) --snpo: confcache [EMAIL PROTECTED]: Type 23 --> 3 --snpo: confcache [EMAIL PROTECTED]: Type 23 --> 4 (duplicate) --snpo: confcache [EMAIL PROTECTED]: Eth 00-60-09-c4-04-0e --> 1 --snpo: confcache [EMAIL PROTECTED]: Eth 00-60-09-c4-04-0f --> 2 --snpo: confcache [EMAIL PROTECTED]: Eth --> 3 --snpo: confcache [EMAIL PROTECTED]: Eth --> 4 (duplicate) --base: Get Interface Info --base: Walking ifIndex --base: Walking ifType --base: Walking ifSpeed --base: Walking ifAdminStatus --base: Walking ifOperStatus --base: Walking ifAlias Here's part of what happens on Redhat 9. Those numbers after "Ip" are supposed to be IP addresses; obviously they're not. The numbers following "-->" are supposed to the SNMP interface numbers; obviously they're not either. [EMAIL PROTECTED] root]# cfgmaker --ifref=descr --global "Options[_]: growright,bits" --global "WorkDir: /var/www/html/mrtg" [EMAIL PROTECTED] > test.cfg [EMAIL PROTECTED] root]# bash cfgmaker5.bsh --base: Get Device Info on [EMAIL PROTECTED]: --base: Vendor Id: cisco --base: Populating confcache --snpo: confcache [EMAIL PROTECTED]: Descr --> --snpo: confcache [EMAIL PROTECTED]: Ip 1.0 --> 1 --snpo: confcache [EMAIL PROTECTED]: Ip 2.0 --> 255 --snpo: confcache [EMAIL PROTECTED]: Ip 3.0 --> 251002268 --snpo: confcache [EMAIL PROTECTED]: Ip 4.0 --> 59187 --snpo: confcache [EMAIL PROTECTED]: Ip 5.0 --> 1 --snpo: confcache [EMAIL PROTECTED]: Ip 6.0 --> 241349170 --snpo: confcache [EMAIL PROTECTED]: Ip 7.0 --> 0 --snpo: confcache [EMAIL PROTECTED]: Ip 8.0 --> 0 --snpo: confcache [EMAIL PROTECTED]: Ip 9.0 --> 9426503 --snpo: confcache [EMAIL PROTECTED]: Ip 10.0 --> 11320879 --snpo: confcache [EMAIL PROTECTED]: Ip 11.0 --> 148922 --snpo: confcache [EMAIL PROTECTED]: Ip 12.0 --> 27446 --snpo: confcache [EMAIL PROTECTED]: Ip 13.0 --> 30 --snpo: confcache [EMAIL PROTECTED]: Ip 14.0 --> 0 --snpo: confcache [EMAIL PROTECTED]: Ip 15.0 --> 0 --snpo: confcache [EMAIL PROTECTED]: Ip 16.0 --> 0 --snpo: confcache [EMAIL PROTECTED]: Ip 17.0 --> 0 --snpo: confcache [EMAIL PROTECTED]: Ip 18.0 --> 0 --snpo: confcache [EMAIL PROTECTED]: Ip 19.0 --> 0 --snpo: confcache [EMAIL PROTECTED]: Ip 20.1.1.10.1.5.2 --> 10.1.5.2 --snpo: confcache [EMAIL PROTECTED]: Ip 20.1.1.10.1.7.2 --> 10.1.7.2 --snpo: confcache [EMAIL PROTECTED]: Ip 20.1.1.10.3.3.1 --> 10.3.3.1 --snpo: confcache [EMAIL PROTECTED]: Ip 20.1.2.10.1.5.2 --> 4 <snip> Any suggestions greatly appreciated! -----Original Message----- From: James-lists [mailto:[EMAIL PROTECTED] Sent: Friday, April 11, 2003 3:21 PM To: [EMAIL PROTECTED] Subject: [mrtg] Re: MRTG doesn't work on Redhat 9 (and 8?); SNMP bug? No problems with RH 8 and I am sure there are none with RH 9. If you would like help, please post any compile or other error messages you have. james -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
