Load is often multiplied by 100 to get a whole number. So it still applies.
This should work via snmp as well using MRTG's builtin math functions on the target. -----Original Message----- From: Scott Moseman [mailto:[EMAIL PROTECTED] Sent: Tuesday, May 06, 2003 9:55 AM To: [EMAIL PROTECTED] Subject: [mrtg] Re: Values in the Tenths The cpu load number is not a "percent" value. Constant values over 1.0 mean really high use. Thanks, Scott Moseman -----Original Message----- From: [EMAIL PROTECTED] Sent: Tuesday, May 06, 2003 8:46 AM To: '[EMAIL PROTECTED]' Subject: [mrtg] Re: Values in the Tenths How do you collect the data script or SNMP? If by script don't round and multiply by 10, your graph will be in 10ths of a percent then, with a range of 1-1000. If your CPU use is so low why do you care? -----Original Message----- From: Scott Moseman [mailto:[EMAIL PROTECTED] Sent: Tuesday, May 06, 2003 9:44 AM To: [EMAIL PROTECTED] Subject: [mrtg] Values in the Tenths I'm trying to graph cpu "load" on Red Hat boxes. MRTG wants to only graph whole numbers (0,1,2). And most of our cpu load remains < 0 (eg- 0.2). Is there a way to get MRTG to graph this data? Or am I going to have to deal w/ whole numbers? Thanks, Scott Moseman -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
