Joe: I am doing something similar with Apex ATM Switches. Using the interface ifInOctets and ifOutOctets out of the box is not accurate at all. You will need to get in to the specific enterprise MIB and look for the sysLkTxCells and sysLkRxCells values. Then use the Factor option to multiply out the number of bytes per cell for a more accurate view of the traffic.
Thanks, Don Aldridge (410) 266-4871 -----Original Message----- From: Joe Graeber [mailto:[EMAIL PROTECTED] Sent: Thursday, May 22, 2003 3:09 PM To: [EMAIL PROTECTED] Subject: [mrtg] Nortel Passport 6400 Series (6420, 6480) ... Does anyone have any experience running MRTG with these ATM Switches? We've found that the included script finds the physical interfaces, but only seems to keep counters on the Logical Interfaces. In addition, the 'vns' reporting seems quite inaccurate. I was wondering if anyone had some tips/clues as to why this may be occurring. Thanks in advance! Joe -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
