Hi there, I have been using MRTG to graph bandwidth successfully for the past few month's no, hiccups.
However, when I try to graph the error packet in & out it only seems to update the first line in log. I have looked at the possibility of the Maxbytes value being set too low, though changing this doesn't seem to have an effect. Verified that the counter is actually changing, the new value is entered on the first line and the old ones "discarded", it feels like maxbytes but it doesn't add up for me. Here is the config for one of my targets (there is 8 in all in this cfg file, all exactly the same setup). HtmlDir: /var/www/html/mrtg-2 ImageDir: /var/www/html/mrtg-2/images LogDir: /var/www/html/mrtg-2/logs Forks: 8 Options[_]: growright,nopercent #################################################### ### Errors in Line outbound for Durban Airfreight Target[Errors]: ifInErrors.7&ifOutErrors.7:[EMAIL PROTECTED]: SetEnv[Errors]: MRTG_INT_IP="172.28.0.9" MRTG_INT_DESCR="Serial0/6" MaxBytes[Errors]: 1000000 Directory[Errors]: errors YLegend[Errors]: Error Packets ShortLegend[Errors]: pkts Legend1[Errors]: Packets with errors Inbound Legend2[Errors]: Packets with errors Outbound LegendI[Errors]: Errors In: LegendO[Errors]: Errors Out: Title[Errors]: Serial0/6 CN:64-05390-00 Branch: Durban Airfreight Router: roh-dr0-pkt PageTop[Errors]: <H1>Packet Errors In and Outbound</H1> <TABLE> <TR><TD>System:</TD> <TD>roh-dr0-pkt in Parktown</TD></TR> <TR><TD>Maintainer:</TD> <TD>Telkom CNC:</TD></TR> <TR><TD>Description:</TD><TD></TD></TR> <TR><TD>ifType:</TD> <TD>propPointToPointSerial (22)</TD></TR> <TR><TD>ifName:</TD> <TD>Se0/6</TD></TR> <TR><TD>Max Speed:</TD> <TD>128.0 kbits/s</TD></TR> </TABLE> _________________________ Heres the log file 1055841309 102472 56605 1055841309 0 0 0 0 1055841008 0 0 0 0 1055841000 0 0 0 0 1055840700 0 0 0 0 1055840400 0 0 0 0 1055840100 0 0 0 0 1055839800 0 0 0 0 1055839500 0 0 0 0 1055839200 0 0 0 0 Any ideas would be greatly welcomed. Thanks and Regards Nic le Roux Network Administrator -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
