I am currently running MRTG v2.9.22 and it works great. I wanted to get MRTG running with RDDtool so I decided to setup another installation of MRTG on another system (WinNT 4 sp6a & IIS4) for testing so I wouldn't mess up my current non-rdd installation. I installed the latest ActivePerl, MRTG v 2.10pre3 and copied my configs from the working v2.9.22 installation. I did not installed RDD because I wanted to make sure MRTG was working correctly prior to doing so. On the test installation when I run MRTG I get the following warnings and get no info in the images.
WARNING: Skipping host 10.117.101.1 as it does not resolve to an IPv4 address WARNING: no data for ifInOctets&ifOutOctets:[EMAIL PROTECTED] Skipping further queries for Host 10.117.101.1 in this round. WARNING: Skipping host 10.117.14.2 as it does not resolve to an IPv4 address WARNING: no data for ifInOctets&ifOutOctets:[EMAIL PROTECTED] Skipping further queries for Host 10.117.14.2 in this round. I do not get the warnings in v2.9.22. I can resolve the address to a DNS entry. I know the device has data for the interfaces. Any idea's as to why I get these warning under v2.10pre3 and how to resolve? Here is the config: Target[btown_e11]: 1:[EMAIL PROTECTED]: SetEnv[btown_e11]: MRTG_INT_IP="10.117.101.1" MRTG_INT_DESCR="E11" MaxBytes[btown_e11]: 12500000 Title[btown_e11]: Brownstown Router Ethernet Port PageTop[btown_e11]: <H1>Brownstown ARN Ethernet Port</H1> <TABLE> <TR><TD>System:</TD> <TD>Nortel ARN Router in Brownstown, Michigan</TD></TR> # <TR><TD>Maintainer:</TD> <TD>Timothy J Fortier</TD></TR> <TR><TD>Description:</TD><TD>Ethernet Port E11 </TD></TR> <TR><TD>ifType:</TD> <TD>FastEthernet (100BaseT) (62)</TD></TR> # <TR><TD>ifName:</TD> <TD>E11</TD></TR> <TR><TD>Max Speed:</TD> <TD>100 MBytes/s</TD></TR> <TR><TD>Ip:</TD> <TD>10.117.101.1 (01arnmdf.brasscrafthq.com)</TD></TR> </TABLE> Target[btown_s11]: 2:[EMAIL PROTECTED]: SetEnv[btown_s11]: MRTG_INT_IP="10.117.14.2" MRTG_INT_DESCR="S11" MaxBytes[btown_s11]: 64000 Title[btown_s11]: Brownstown Router Sync Port PageTop[btown_s11]: <H1>Brownstown ARN Sync Port</H1> <TABLE> <TR><TD>System:</TD> <TD>Nortel ARN Router in Brownstown, Michigan</TD></TR> # <TR><TD>Maintainer:</TD> <TD>Timothy J Fortier</TD></TR> <TR><TD>Description:</TD><TD>Sync Port S11 </TD></TR> <TR><TD>ifType:</TD> <TD>propPointToPointSerial (22)</TD></TR> # <TR><TD>ifName:</TD> <TD>S11</TD></TR> <TR><TD>Max Speed:</TD> <TD>512kbps</TD></TR> <TR><TD>Ip:</TD> <TD>10.117.14.2 (01arnmdf.brasscrafthq.com)</TD></TR> </TABLE> Tim -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
