Instead of using the UPS MIB you could try using the Tripplite MIB which should return Battery voltage as an integer (1.3.6.1.4.1.850.1.1.2.5)
Kevin -----Original Message----- From: Chan, Wilson [mailto:[EMAIL PROTECTED] Sent: Monday, July 14, 2003 3:26 PM To: Daniel J McDonald Cc: [EMAIL PROTECTED] Subject: [mrtg] How do you scale the output if your using rateup? >>> Wilson Wrote: >>> Yhe snmp value is displayed as an Integer value 546 but I need it to >>> be graphed in MRTG as 54.6Volts and not 546Volts. How do you do this? >> Peter Glanville Wrote: >> Divide the target by 10 >> Target[33.1.2.5.0]: 33.1.2.5.0&33.1.2.5.0:[EMAIL PROTECTED] /10 > Daniel Wrote: > Note that this will only work if you are using rrdtool as the backend. > rateup only understands integers. With rateup you would probably need > to play with the scale command. How do you play with the scale command? -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
