I have a 2620 with an IMA interface and I used cfgmaker to create the config
file. What does it show for the Max Speed? I have a four port card, but I am
currently only using 2 of the T1 ports. My Max Speed is 375.0 MBytes and the
ifType is aal5 (49). The amount of traffic on my graph looks correct. I would
not think that cfgmaker would make the target correctly. The possibility is
that it doesn't know the correct speed. It has been a while but I think that I
added a BANDWIDTH command for the interface. Below is the config for the
interface from my router:
interface ATM1/IMA0.1 point-to-point
description Link to Kansas City
mtu 1500
bandwidth 3000000
backup delay 10 60
backup interface Dialer1
ip address 10.10.254.2 255.255.255.0
no ip route-cache
no ip mroute-cache
pvc 1/136
protocol ip 10.10.254.1 broadcast
broadcast
encapsulation aal5snap
Michael Wren
Senior Network Analyst
Burns & McDonnell Engineering
P.O. Box 419173
Kansas City, MO 64141-6173
[EMAIL PROTECTED]
816-822-3160
>>> Chris Cook <[EMAIL PROTECTED]> 07/30/2003 6:28:09 PM >>>
Hello,
I'm trying to graph traffic on a Cisco IMA interface but all I get is
all 0's for traffic passed. I can look at the interface on the router
itself and see the data incrementing. I'm using the config produced by
cfgmaker for the IMA interface. Is there something I am missing?
Thanks,
--
Chris
o----< [EMAIL PROTECTED] >------------------------------------o
|Chris Cook - Admin |TCWORKS.NET - http://www.tcworks.net |
|The Computer Works ISP |FreeBSD - http://www.freebsd.org |
o-------------------------------------------------------------o
--
Unsubscribe mailto:[EMAIL PROTECTED]
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
