Every evening an mrtg monitored device performs a backup, which results in a bandwidth increase to around 80mbps. Typical daily traffic however usually is below 3mbps. I would like to force the report for this device to log all traffic, however only display traffic up to 3mpbs in the daily graph. Here is a snippet from the cfg.
MaxBytes[host.domain.tld_port]: 384000 AbsMax[host.domain.tld_port]: 12500000 Unscaled[host.domain.tld_port]: d MRTG 2.9.28 is using rrdtool 1.0.41 to log. Graphs are generated using 14all 2.25. The result is an unscaled graph, but that has the AbsMax as the vertical limit, instead of MaxBytes. Is this technique possible, or did I misunderstand the documentation? My goal is to have graphs that display only to the 3mbps limit, and crop all that goes above that limit. Mike -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
