A little bit cleaner (no external script required) way to do APC monitoring is to use the template from: http://mrtg.gvolk.com/template/host-apc.template. This will give you traffic in/out, battery capacity/load, battery temperature, input/output frequency, min/max line voltage, and last reason on battery. It requires an APC9606 or 9617 card, and does not report on time-left-on-battery because APC returns this in HH:MM:SS format which would require an external script to turn into a single number (minutes) and I generally don't like using external scripts. ;)
}-----Original Message----- }From: mk [mailto:[EMAIL PROTECTED] }Sent: Wednesday, August 27, 2003 7:53 AM }To: mrtg }Cc: mk; jhumes }Subject: [mrtg] Re: APC monitoring } } }From: "Jason Humes" <[EMAIL PROTECTED]> }To: "'MRTG Mailing List'" <[EMAIL PROTECTED]> }Sent: Wednesday, August 27, 2003 14:16 }Subject: [mrtg] APC monitoring } } }> Hello }> I was wondering if anyone does any MRTG graphing of any APC }UPS? If so, }how }> could I accomplish this. Thanks very much. }> }> }> Jason D. Humes }> }> Applied Computer Solutions Inc. }> 3020 St. Etienne Blvd. }> Windsor, Ontario }> Phone: (519) 944-4300 x211 }> Fax : (519) 944-4247 }> Email : [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> } }Hi Jason. } }Try looking under "\contrib\apc_ups". } } }/Mats } }-- }Unsubscribe mailto:[EMAIL PROTECTED] }Archive http://www.ee.ethz.ch/~slist/mrtg }FAQ http://faq.mrtg.org Homepage http://www.mrtg.org }WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi } } -- Attached file removed by Ecartis and put at URL below -- -- Type: application/ms-tnef -- Size: 1k (1674 bytes) -- URL : http://www.ee.ethz.ch/~slist/p/61-WINMAIL.DAT -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
