Patricia,
Remove the trailing 1 from the CPU OID and walk the table. Most likely
your 3550 has a different index then 1.
Regards,
Pete
----
Peter P. Benac, CCNA
Emacolet Networking Services, Inc
Providing Systems and Network Consulting, Training, Web Hosting Services
Phone: 919-847-1740 or 866-701-2345
Web: http://www.emacolet.com
Need quick reliable Systems or Network Management advice visit
http://www.nmsusers.org
To have principles...
First have courage.. With principles comes integrity!!!
> -----Original Message-----
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Patricia A.
> Malinowski
> Sent: Thursday, September 04, 2003 16:16
> To: [EMAIL PROTECTED]
> Subject: [mrtg] 3550 CPU and etherchannel
>
>
> Hello all,
> I have searched through the MRTG archive(s) to determine
> which OID/MIB to use for monitoring the CPU on each 3550 and
> the traffic on our etherchannel between two Cisco 3550's.
> I've found varying OID's being used. Therefore, I'm asking
> if someone can shed some light on this subject.
>
> I've found the following OID's being used for CPU monitoring:
>
> 1.3.6.1.4.1.9.9.109.1.1.1.1.4.1&1.3.6.1.4.1.9.9.109.1.1.1.1.5.1
> If I do a snmpget on the above, I receive nothing.
>
> 1.3.6.1.4.1.9.2.1.57.0&1.3.6.1.4.1.9.2.1.58.0
>
>
> 1.3.6.1.4.1.9.9.48.1.1.1.6.1&1.3.6.1.4.1.9.9.48.1.1.1.7.1(for
> memory monitoring)
>
> I cannot locate the OID for the etherchannel monitoring, but
> I'm still searching.
> If anyone can help, I'd appreciate it!
>
> Thanks.
>
> -Patricia
>
>
>
> --
> Unsubscribe mailto:[EMAIL PROTECTED]
> Archive http://www.ee.ethz.ch/~slist/mrtg
> FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
> WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
>
>
--
Unsubscribe mailto:[EMAIL PROTECTED]
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
