Awesome, thx very much james !
Regards, -- Ross. -----Original Message----- From: james [mailto:[EMAIL PROTECTED] Sent: Friday, 5 September 2003 1:38 PM To: Ross Tsolakidis Cc: [EMAIL PROTECTED] Subject: Re: [mrtg] Re: mrtg showing very high cpu usage cause of otherapprunning Forgot to mention the advantage of running as a daemon; 1) Saves the load of starting the app every 5 mins 2) loading and reading the config every 5 mins 3) Allows MRTG to fork for faster data acquisition ============================== This email is from PowerServe Australia Pty Limited (A.C.N. 102 661 441) The information contained in this email (including any attached files) may be privileged and confidential intended for the use of the person/persons named above. If you are not the intended recipient, you are advised that any use, distribution or copying of the information is strictly prohibited. If you have received this transmission in error, please notify PowerServe Australia Pty Limited immediately on 1300 790 792 or reply by email to the sender. PowerServe Australia Pty Limited does not represent or warrant that this email or any attached files are free from computer viruses or other defects. Any attached files are provided, and may only be used, on the basis that the user assumes all responsibility for any loss, damage or consequence resulting directly or indirectly from use of the attached files. In any event, the liability of PowerServe Australia Pty Limited is limited to either the resupply of the attached files or the cost of having the attached files resupplied. ============================== -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
