You can't measure a single variable. You need to specify two variables separated by ampersands (&).
As an aside, the "absolute" and "guage" options probably conflict. You probably want to use guage. Hope that helps, Corey. -----Original Message----- From: Texter, Ray [mailto:[EMAIL PROTECTED] Sent: September 9, 2003 2:51 PM To: [EMAIL PROTECTED] Subject: [mrtg] Could not match host I'm working on a configuration s and I keep getting the following error. It still gathers the data but also logs the error. As you can see I've already replaced the hostname with the ip. I also found some suggestion in the archives but they didn't seem to work. Below is the warning and the configuration. Thanks Ray WARNING: Could not match host:'[EMAIL PROTECTED]' ref:'' key:'' Workdir:/var/www/html/mrtg/pompano Target[Pompano-cpu]:789.1.2.1.3.0:[EMAIL PROTECTED] MaxBytes[Pompano-cpu]: 100 #AbsMax[Pompano-cpu]: 100 Title[Pompano-cpu]: (04) CPU Usage Options[Pompano-cpu]: absolute, gauge, noinfo, nopercent, growright Unscaled[Pompano-cpu]: dwmy YLegend[Pompano-cpu]: busy % ShortLegend[Pompano-cpu]: % Legend1[Pompano-cpu]: CPU Busy Percentage Legend2[Pompano-cpu]: Legend3[Pompano-cpu]: Legend4[Pompano-cpu]: LegendI[Pompano-cpu]: Cpu Usage LegendO[Pompano-cpu]: Colours[Pompano-cpu]: BLUE#1000ff,ORANGE#ff8022,DARK GREEN#006600,VIOLET#ff00ff PageTop[Pompano-cpu]: CPU -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
