Are you using bits or bytes? That is most likely where the confusion lies - it usually does.
Paul >>> "Eduardo Sanchez" <[EMAIL PROTECTED]> 09/12/03 03:39PM >>> Hi everybody... I just installed mrtg today, and configured it to monitor my router. Our bandwidth is more or less ~384Kbps, the graphics report a scale until 400Kbps so everything is fine... But for some reason the graphics usage only report 43 kbps for In traffic and 35.9kbps for out traffic. I think it is wrong, we must using more the leased line, here is my config settings for the interface I'm trying to monitor: Target[192.168.0.3_4]: 4:[EMAIL PROTECTED]: SetEnv[192.168.0.3_4]: MRTG_INT_IP="192.168.0.3" MRTG_INT_DESCR="Port_5,-Ethernet-/VANGUARD-320" MaxBytes[192.168.0.3_4]: 46750 WithPeak[192.168.0.3_4]: wmy AbsMax[192.168.0.3_4]: 46750 Unscaled[192.168.0.3_4]: dwmy XSize[192.168.0.3_4]: 600 YSize[192.168.0.3_4]: 300 Title[192.168.0.3_4]: Traffic Analysis for 4 -- Is there something I'm missing in the configuration? Regards, -eduardo s.m. -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
