Paul Thanks, but I'm using the gauge option, so I didn't think I would need to * 300 ... Duane
----- Original Message ----- From: "PAUL WILLIAMSON" <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Monday, September 29, 2003 3:10 PM Subject: [mrtg] Re: one more graph problem... > You've included your problem in the post...very efficient. > > This is the same problem as your first one. You've got less than > 300 units change between one sample and the next. Make it greater > than 300 and you'll be set. > > Paul > > >>> "Duane Cox" <[EMAIL PROTECTED]> 09/29/03 03:08PM >>> > I fixed my previous problem, but this on has me stumped. > This is a calculation based on the 3 oids. It's output is fine, but mrtg is not grahing it. The doc says that mrtg will graph the rouned result. What am I doing wrong? > > <snip> > > LOG: > > [EMAIL PROTECTED] bin]# cat /var/www/html/mrtg.illicom.net/wireless/ccu101/ccu101_efficient.log | more > 1064862313 98.6317837805994 98.6317837805994 > 1064862313 0 0 0 0 > 1064862012 0 0 0 0 > 1064862000 0 0 0 0 > 1064861700 0 0 0 0 > 1064861400 0 0 0 0 > 1064861100 0 0 0 0 > -- > Unsubscribe mailto:[EMAIL PROTECTED] > Archive http://www.ee.ethz.ch/~slist/mrtg > FAQ http://faq.mrtg.org Homepage http://www.mrtg.org > WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi > > > -- > Unsubscribe mailto:[EMAIL PROTECTED] > Archive http://www.ee.ethz.ch/~slist/mrtg > FAQ http://faq.mrtg.org Homepage http://www.mrtg.org > WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi > > -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
