OK, let me help: Start here: http://members.urdirect.net/mrtg/ups/ Then go here: http://members.urdirect.net/mrtg/ups/san.ups Then go here: http://members.urdirect.net/mrtg/ups/ups1-noc2.9.html Then go here: http://members.urdirect.net/mrtg/ups/getruntime
It's all there. In this case, specify the hostname/address, SNMP community, and applicable SNMP OID in the MRTG config file when you call the programming. Pete Templin Senior Staff Engineer TexLink Communications (210) 892-4183 [EMAIL PROTECTED] -----Original Message----- From: Jason Humes [mailto:[EMAIL PROTECTED] Sent: Tuesday, September 30, 2003 9:48 AM To: Pete Templin; 'MRTG Mailing List' Subject: RE: [mrtg] Re: UPS runtime graphing OK great, someone else is doing what I would like to, yet this page you linked to does not show the actual script being used for the conversion. The script which was posted on this forum in regards to this question, I don't understand where to put in my target IP address/community. Please help -----Original Message----- From: Pete Templin [mailto:[EMAIL PROTECTED] Sent: Tuesday, September 30, 2003 9:33 AM To: Jason Humes; MRTG Mailing List Subject: RE: [mrtg] Re: UPS runtime graphing http://members.urdirect.net/mrtg/ups/ has sample configs and sample scripts for an APC UPS. HTH, YMMV. Pete Templin Senior Staff Engineer TexLink Communications (210) 892-4183 [EMAIL PROTECTED] -----Original Message----- From: Jason Humes [mailto:[EMAIL PROTECTED] Sent: Tuesday, September 30, 2003 7:22 AM To: 'David Gabler'; 'MRTG Mailing List' Subject: [mrtg] Re: UPS runtime graphing Hello I've searched through the archives and found someone else who had this problem, but it looks like he never got the help needed to resolve the issue. If anyone has any idea, please help. THanks -----Original Message----- From: David Gabler [mailto:[EMAIL PROTECTED] Sent: Monday, September 29, 2003 4:08 PM To: 'Jason Humes'; 'MRTG Mailing List' Subject: RE: [mrtg] UPS runtime graphing Try searching through the archives. This has been addressed many times. > -----Original Message----- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] > On Behalf Of Jason Humes > Sent: Monday, September 29, 2003 12:45 PM > To: 'MRTG Mailing List' > Subject: [mrtg] UPS runtime graphing > > > Hi > I would like to graph the remaining runtime of my UPS battery pack, > but the SNMP value it returns is a time, ie 02:10:22, meaning two > hours, 10 minutes, > etc remaining. Any idea how I could graph this. Thanks > Jason D. Humes > -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
