I deleted *day.png hoping that it would be regenetated with y-axis that is scalable to the data, but new graph looks the same as old one. If anybody had similar problems, please advise. Thanks
-----Original Message----- From: Leonard Krivopaltsev Sent: Wednesday, October 01, 2003 10:45 AM To: [EMAIL PROTECTED] Subject: [mrtg] scaling the graphs - the curve is at the very buttom of the graph Hi everybody I am measuring IO writes. I set my max to 40M (41943040), which maximum throughput. On the vertical scale, MRTG draw the scale up to 24M, but my actual curve max is ~500K/sec - so the graph sits at the buttom. Why mrtg did not scale it correctly? My max peak for that value has been 1M/sec. How can i force it to rescale to something more meaningful? thank you here is my config Target[10.10.5.23_DISK_IO_WRITE]: .1.3.6.1.4.1.311.1.1.3.1.1.4.1.18.0&.1.3.6.1.4.1.311.1.1.3.1.1.4.1.18.0:[EMAIL PROTECTED]:::::2 Options[10.10.5.23_DISK_IO_WRITE]: integer,unknaszero,nopercent,gauge,noo MaxBytes[10.10.5.23_DISK_IO_WRITE]: 41943040 Title[10.10.5.23_DISK_IO_WRITE]: eq-w2k-db-0-prod-PRIMARY YLegend[10.10.5.23_DISK_IO_WRITE]: % Bytes/sec ShortLegend[10.10.5.23_DISK_IO_WRITE]: % PageTop[10.10.5.23_DISK_IO_WRITE]: <H1>DISK I/O WRITE (10.10.5.23)</H1> <TABLE> <TR><TD>System:</TD> <TD>10.10.5.23</TD></TR> <TR><TD>Maintainer:</TD> <TD></TD></TR> <TR><TD>Description:</TD><TD> Max rate is 320M/sec </TD></TR> <TR><TD>ifType:</TD> <TD>DISK IO WRITE</TD></TR> <TR><TD>ifName:</TD> <TD></TD></TR> <TR><TD>Ip:</TD> <TD>10.10.5.23</TD></TR> </TABLE> -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
