Try asking 64 bits mibs. I had that problem, and it works properly asking snmp version 2. Try something like this:
./cfgmaker --global 'WorkDir: /data/' --global 'Options[_]: bits,growright' --global --show-op-down --ifref=name --ifdesc=type --snmp-options=:::::2 --output /data/switch.cfg [EMAIL PROTECTED] The modifier --snmp-options=:::::2 tells mrtg to ask for snmp version 2. Good luck. -----Mensaje original----- De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] En nombre de bfcbruno Enviado el: viernes, 03 de octubre de 2003 0:17 Para: mrtg Asunto: [mrtg] Switch 3512 - Cisco Folks, I'm trying to use mrtg in the one of the gigabits, but the graphic seams to be something wrong. It should be passing more packets than it is appearing. I compare the "sh interafce" commands to the graph and are differents. The IOS version : IOS (tm) C3500XL Software (C3500XL-C3H2S-M), Version 12.0(5.4)WC(1) I read something about 64-bit problem...but i'm not sure...if there are any patches or beta releases to fix this out, please if possible send the url to download. Thanks you Bruno -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
