Christiane, Using SNMPv2 for your polling should fix the problem. You're probably rolling the counter over between intervals which is why you see strange results. Try this...
Target[borderswi1_23]: 23:[EMAIL PROTECTED]:::::2 Hope that helps, Corey. -----Original Message----- From: Christiane Edler [mailto:[EMAIL PROTECTED] Sent: October 16, 2003 4:43 PM To: [EMAIL PROTECTED] Subject: [mrtg] MRTG problem 50 mbit/s Hello, I've got a problem with MRTG on a 100 mbit/s switch port, where I only get peaks of 50 mbit/s, but the real traffic is much higher. An example is on http://www.region.hm/mrtg-problem/borderswi1_23.html but it should(!) look like http://www.region.hm/mrtg-problem/summary.html (only in mbit/s instead of Mbyte/s and little other values). The traffic in real is a smooth graph, not that one with those dales in it. :-( The important configuration options are: Options[_]: growright, bits AbsMax[_]: 25000000 Target[borderswi1_23]: 23:[EMAIL PROTECTED]: MaxBytes[borderswi1_23]: 12500000 Any advice desired. Thanks in advance. -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
