>-----Ursprüngliche Nachricht----- >Von: Daniel J McDonald [mailto:[EMAIL PROTECTED] >Gesendet: Montag, 13. Oktober 2003 14:55 >An: Braendle, Juergen >Cc: '[EMAIL PROTECTED]' >Betreff: [mrtg] Re: AW: Re: cammer
>On Mon, 2003-10-13 at 07:13, Braendle, Juergen wrote: >> Hi there, >> >> where can we find your "new" version of cammer? >> The new stuff is quite interesting. >http://www.austinnetworkdesign.com/mrtg/ >I put that version up a while back. I'll post updates there when I can. >-- >Daniel J McDonald <[EMAIL PROTECTED]> >Austin Energy Hi there, On Friday I tried to get you new cammer stuff to work But I get a strange error message (see below this message). The switch is a Cisco 2924C-XL see "sh ver" below. I also tried some other Cisco Switches but I could not get anything to work. Maybe there is a problem with the "[EMAIL PROTECTED] stuff". Any help welcome Greetings from Germany J. Brändle swi-mn-02#sh ver Cisco Internetwork Operating System Software IOS (tm) C2900XL Software (C2900XL-H2S-M), Version 12.0(5.1)XP, MAINTENANCE INTERIM SOFTWARE Copyright (c) 1986-1999 by cisco Systems, Inc. Compiled Fri 10-Dec-99 10:57 by cchang Image text-base: 0x00003000, data-base: 0x002BA814 ROM: Bootstrap program is C2900XL boot loader swi-mn-02 uptime is 2 years, 14 weeks, 5 days, 3 hours, 32 minutes System returned to ROM by power-on System restarted at 05:50:47 MET Mon Jul 9 2001 System image file is "flash:c2900XL-h2s-mz-120.5.1-XP.bin" cisco WS-C2924C-XL (PowerPC403GA) processor (revision 0x11) with 8192K/1024K bytes of memory. Processor board ID 0x0F, with hardware revision 0x01 Last reset from power-on Processor is running Enterprise Edition Software Cluster member switch capable 24 FastEthernet/IEEE 802.3 interface(s) 32K bytes of flash-simulated non-volatile configuration memory. Base ethernet MAC Address: 00:D0:58:FD:60:40 Motherboard assembly number: 73-3381-04 Power supply part number: 34-0834-01 Motherboard serial number: FAA03159H96 Power supply serial number: PHI031201NC Model revision number: A0 Model number: WS-C2924C-XL-A System serial number: FAA0322K0PY Configuration register is 0xF netmaster:/usr/local/medianet/Software/NETSTUFF/cammer-1.5# ./cammer.pl * Gather VLAN index Table from Switch xxx.xxx.xxx.xxx * Going into Cisco 2900/3500 Mode * Gather Interface Name Table from Switch 1 3 6 1 2 1 31 1 1 1 1 * Gather Trunking Status from switch 1 3 6 1 4 1 9 9 46 1 6 1 1 14 * Gather Arp Table from Router 1 3 6 1 2 1 4 22 1 2 * Gather Interface Name Table from Router 1 3 6 1 2 1 31 1 1 1 1 * Gather Mac 2 Port and Port 2 Interface table for all VLANS [EMAIL PROTECTED] 1 3 6 1 2 1 17 4 3 1 2, 1 3 6 1 2 1 17 1 4 1 2 do vlan 1 SNMP Error: no response received SNMPv2c_Session (remote host: "xxx.xxx.xxx.xxx" [xxx.xxx.xxx.xxx].161) community: "[EMAIL PROTECTED]" request ID: -1177659889 PDU bufsize: 8000 bytes timeout: 2s retries: 5 backoff: 1) at /usr/perl5/site_perl/5.005/SNMP_Session.pm line 1006 SNMP Error: no response received SNMPv2c_Session (remote host: "xxx.xxx.xxx.xxx" [xxx.xxx.xxx.xxx].161) community: "[EMAIL PROTECTED]" request ID: -1177659888 PDU bufsize: 8000 bytes timeout: 2s retries: 5 backoff: 1) at /usr/perl5/site_perl/5.005/SNMP_Session.pm line 1006 do vlan 9 SNMP Error: no response received SNMPv2c_Session (remote host: "xxx.xxx.xxx.xxx" [xxx.xxx.xxx.xxx].161) community: "[EMAIL PROTECTED]" request ID: 1514973435 PDU bufsize: 8000 bytes timeout: 2s retries: 5 backoff: 1) at /usr/perl5/site_perl/5.005/SNMP_Session.pm line 1006 SNMP Error: no response received -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
