Is the target on the same line as the OIDs? It may just be a wordwrap issue and I'm not seeing it like you pasted it in.
It could be that you need an "instance" like 0 or 1. Can you snmpget those specific OIDs, or do you need to add a number to the end? If so, you need to add that to the end of the OIDs in the target line as well. Paul >>> "Tony Banks" <[EMAIL PROTECTED]> 10/23/03 01:35PM >>> I have entered the following in the mrtg.cfg and when I run perl mrtg mrtg.cfg EnableIPv6: no # set defaults # Options[_]: growright # make legends reflect these are call counters YLegend[_]: Active Calls ShortLegend[_]: calls LegendI[_]: calls: LegendO[_]: calls: ###################################################################### #----------------------------------------------------------------- # Purpose: DS0s and PPP Sessions. #----------------------------------------------------------------- Target[10.13.1.90_DSOPPP]: 1.3.6.1.4.1.9.10.19.1.1.4&1.3.6.1.4.1.9.10.19.1.1.4:[EMAIL PROTECTED] MaxBytes1[10.13.1.90_DS0PPP]: 200 MaxBytes2[10.13.1.90_DS0PPP]: 200 Title[10.13.1.90_DS0PPP]: DS0s and PPP sessions in Use PageTop[10.13.1.90_DS0PPP]: <H2>DS0s and PPP sessions in Use</H2> <TABLE> <TR><TD>Device:</TD><TD>10.13.1.90</TD></TR> <TR><TD><a href="/mrtg/mrtg.html">HOME</a></TD></TR> </TABLE> Options[10.13.1.90_DS0PPP]: gauge Get this error: cfg error unknown option 1.3.6.1.4.1.9.10.19.1.1.4&1.3.6.1.4.1.9.10.19.1.1.4 Any idea why according to the cisco site this should work with AS5300 -Tony -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
