I have been using MRTG for a while know (MRTG-RDDTool installed in a W2K box).
Today I had to recreate a a file for a router. After doing it, I run perl mrtg
filename to check it was OK. I got the following message:
D:\mrtg\bin>perl mrtg router-rrdformat.cfg
SNMP Error:
Received SNMP response with error code
error status: noSuchName
index 1 (OID: 1.3.6.1.2.1.31.1.1.1.1.18)
SNMPv1_Session (remote host: "router" [10.105.31.16].161)
community: "XXXXXX"
request ID: -1734211504
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
SNMPGET Problem for ifName.18 ifInOctets.18 ifName.18 ifOutOctets.18 on [EMAIL
PROTECTED]:
WARNING: skipping because at least the query for ifName.18 on router did not
succeed
SNMP Error:
Received SNMP response with error code
error status: noSuchName
index 1 (OID: 1.3.6.1.2.1.31.1.1.1.1.19)
SNMPv1_Session (remote host: "router" [10.105.31.16].161)
community: "XXXXX"
request ID: -1734211503
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
SNMPGET Problem for ifName.19 ifInOctets.19 ifName.19 ifOutOctets.19 on [EMAIL
PROTECTED]:
WARNING: skipping because at least the query for ifName.19 on router did not
succeed
ERROR: Target[router_se0_1.50][_IN_] ' $$target[3]{$mode} ' did not
eval into defined data
ERROR: Target[router_se0_1.50][_OUT_] ' $$target[3]{$mode} ' did no
t eval into defined data
ERROR: Target[router_se0_3.53][_IN_] ' $$target[4]{$mode} ' did not
eval into defined data
ERROR: Target[router_se0_3.53][_OUT_] ' $$target[4]{$mode} ' did no
t eval into defined data
I have no idea why this is happening. I have used the same procedure for my
other routers (around 50) without problems. Any suggestions, ideas would be
greatly appreciated. Regards,
Gerardo
****************************************************************
Please Note
The information in this E-mail message is legally privileged and confidential
information intended only for the use of the individual(s) named above. If you,
the reader of this message, are not the intended recipient, you are hereby
notified that you should not further disseminate, distribute, or forward this
E-mail message. If you have received this E-mail in error, please notify the
sender. Thank you
*****************************************************************
---------------------------------
Do you Yahoo!?
Protect your identity with Yahoo! Mail AddressGuard
--
Unsubscribe mailto:[EMAIL PROTECTED]
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
