Hi, I've gotten bored with just monitoring bandwidth and am trying to plot the temperature and humidity reading off my SNMP-capable PDU in the data center. I have the MIB (it's called Sentry3.mib for a ServerTech PXTL PDU) which I saved to my working directory and called in my global options as LoadMIBs: /www/htdocs/pxtl/Sentry3.mib. The rest of the configs is pretty basic - I used cfgmaker to get a basic config file and then edited it to add in the OIDs I want. Target[temp1]: 1.3.6.1.4.1.1718.3.2.5.1.6&1.3.6.1.4.1.1718.3.2.5.1.6:[EMAIL PROTECTED] What I get is "SNMP response with error code, error status: noSuchName, index 1 (OID: 1.3.6.1.4.1.1718.3.2.5.1.6)" and then down at the bottom, it says Skipping Update of temp1, inlast (and outlast) did not eval into defined data. I'm assuming that (1) it did not query the correct information and (2) it thinks it's querying for inPkts and Outpkts still. Does anyone have an Explanation for Dummies of the proper way to have vendor-specific OIDs be called by mrtg? Thanks -H
***************************************************************************** The information in this email is confidential and may be legally privileged. It is intended solely for the addressee. Access to this email by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. When addressed to our clients any opinions or advice contained in this email are subject to the terms and conditions expressed in the governing KPMG client engagement letter. ***************************************************************************** -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
