Well I found a McData mib and found the 64-bit counter for the interfaces. However when I get/walk the interfaces I get hex numbers. If I use the 32-bit counters then I get base-10 numbers, but on 2-gig SAN interfaces the 32-bit counters are useless. Is there a way in MRTG to convert the hex to decimal on the Target line?
Here is an example of an SNMPWALK: .iso.3.6.1.4.1.289.2.1.1.2.3.1.1.81.11 = Hex: 00 00 02 45 CC 11 F0 D0 .iso.3.6.1.4.1.289.2.1.1.2.3.1.1.81.12 = Hex: 00 00 00 15 B8 AF 96 00 .iso.3.6.1.4.1.289.2.1.1.2.3.1.1.81.13 = Hex: 00 00 00 06 A4 E4 21 E4 .iso.3.6.1.4.1.289.2.1.1.2.3.1.1.81.14 = Hex: 00 00 00 9A 8A E1 8F 60 .iso.3.6.1.4.1.289.2.1.1.2.3.1.1.81.15 = Hex: 00 00 00 00 1B 8F 2F 2C .iso.3.6.1.4.1.289.2.1.1.2.3.1.1.81.16 = Hex: 00 00 00 4D D7 C2 20 6C .iso.3.6.1.4.1.289.2.1.1.2.3.1.1.81.17 = Hex: 00 00 00 00 16 DE 7F 5C TIA, Eric Brander Eric_Mailing_List at rednarb dot com -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
