Peter, Thanks for the info. I have Getif on a Windoze box, and I can browse the MIB fine. I get .1.3.6.1.4.1.1718.3.2.5.1.6 correlating to .iso.org.dod.internet.private.enterprises.serverTech.sentry3.systemTables.te mpHumidSensorTable.tempHumidSensorEntry.tempHumidSensorTempValue but down in the frame, there are two values that pop up when I hit Start :
.iso.org.dod.internet.private.enterprises.serverTech.sentry3.systemTables.te mpHumidSensorTable.tempHumidSensorEntry.tempHumidSensorTempValue.1.1 *and* .iso.org.dod.internet.private.enterprises.serverTech.sentry3.systemTables.te mpHumidSensorTable.tempHumidSensorEntry.tempHumidSensorTempValue.1.2. Is this what you mean when you say "instance"? I need the info from the second one, which is the temperature. If I append the original entry up top to add in the suffix .1.1 or .1.2, Getif fails to retrieve the value - it only likes it when I leave it as .1.3.6.1.4.1.1718.3.2.5.1.6. Any clues? I'd like to browse the MIB from my RedHat MRTG station - any recommendations on what to use? -H -----Original Message----- From: Peter Glanville [mailto:[EMAIL PROTECTED] Sent: Wednesday, November 12, 2003 11:29 AM To: Barakat, Mehmet-Hasan; [EMAIL PROTECTED] Subject: Re: [mrtg] Re: Calling MIBs > Target[temp1]: .1.3.6.1.4.1.1718.3.2.5.1.6&.1.3.6.1.4.1.1718.3.2.5.1.6:[EMAIL PROTECTED] > >There isn't much there. What's wrong? The above OID is listed in the MIBs, but does the box support it? Walk the MIB (eg using GetIf) and see what is there. That will also show the correct instance number if needed. PS. You do not NEED a MIB in MRTG. A MIB merely translates Name to OID number eg ifInOctets = .1.3.6.1.2.1.2.2.1.10 So if you wish to specify the Name on the Target line, MRTG needs to have the MIB to translate. If you are going to specify the full OID, Mrtg does not need the MIB. Peter ***************************************************************************** The information in this email is confidential and may be legally privileged. It is intended solely for the addressee. Access to this email by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. When addressed to our clients any opinions or advice contained in this email are subject to the terms and conditions expressed in the governing KPMG client engagement letter. ***************************************************************************** -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
