Hello, I have been trying to use mrtg with a broadband router without success. When I use the cfgmaker I get a mrtg.cfg with the following message about speed beeing 0...
### The following interface is commented out because: ### * has a speed of 0 which makes no sense # Target[192.168.0.10_1]: 1:[EMAIL PROTECTED]: # SetEnv[192.168.0.10_1]: MRTG_INT_IP="" MRTG_INT_DESCR="Ethernet-WAN" # MaxBytes[192.168.0.10_1]: 0 # Title[192.168.0.10_1]: Traffic Analysis for 1 -- # PageTop[192.168.0.10_1]: <H1>Traffic Analysis for 1 -- </H1> and everything is commented out ?? The strange thing is that if I use : snmpwalk -v 2c -c public 192.168.0.10 I get the following.... SNMPv2-MIB::sysDescr.0 = STRING: USR Broadband Router SNMPv2-MIB::sysObjectID.0 = OID: SNMPv2-SMI::enterprises.9086 SNMPv2-MIB::sysUpTime.0 = Timeticks: (818800) 2:16:28.00 SNMPv2-MIB::sysContact.0 = STRING: SNMPv2-MIB::sysContact.0 = STRING: SNMPv2-MIB::sysName.0 = STRING: SNMPv2-MIB::sysLocation.0 = STRING: SNMPv2-MIB::sysServices.0 = INTEGER: 2 IF-MIB::ifNumber.0 = INTEGER: 1 IF-MIB::ifIndex.1 = INTEGER: 1 IF-MIB::ifDescr.1 = STRING: Ethernet-WAN IF-MIB::ifType.1 = INTEGER: ethernetCsmacd(6) IF-MIB::ifMtu.1 = INTEGER: 1500 IF-MIB::ifSpeed.1 = Gauge32: 0 IF-MIB::ifPhysAddress.1 = STRING: 0:c0:49:d6:63:96 IF-MIB::ifAdminStatus.1 = INTEGER: up(1) IF-MIB::ifOperStatus.1 = INTEGER: up(1) IF-MIB::ifLastChange.1 = Timeticks: (818850) 2:16:28.50 IF-MIB::ifInOctets.1 = Counter32: 101351561 IF-MIB::ifInUcastPkts.1 = Counter32: 176856 IF-MIB::ifInNUcastPkts.1 = Counter32: 64796 IF-MIB::ifInDiscards.1 = Counter32: 0 IF-MIB::ifInErrors.1 = Counter32: 0 IF-MIB::ifInUnknownProtos.1 = Counter32: 0 IF-MIB::ifOutOctets.1 = Counter32: 42182219 IF-MIB::ifOutUcastPkts.1 = Counter32: 169410 IF-MIB::ifOutNUcastPkts.1 = Counter32: 19 IF-MIB::ifOutDiscards.1 = Counter32: 0 IF-MIB::ifOutErrors.1 = Counter32: 0 IF-MIB::ifOutQLen.1 = Gauge32: 16 IF-MIB::ifSpecific.1 = OID: ccitt End of MIB I have trying to read documentation but could fix the settings and have mrtg following the proper variables.... (trafic in and trafic out) Can anyone give me any tip ? David -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
