Hello all, I am trying to access CPU, memory, and connections on a Cisco PIX 515 E running IOS 6.3(2). I am able to get all interfaces by IP, so I am assuming (correctly??) that SNMP is enabled properly on the firewall. MRTG seems to run properly, all of the OIDs I have tried return nothing but zeros, although all the traffic data is accurate (I am also successfully using getlog.pl to monitor servers)... I have 2 Questions: 1. Do OIDs vary between devices of the same type (i.e. can OIDs vary from one PIX to another)? 2. If not-- Has anyone got any OIDs that work with a PIX 515 E running IOS 6.3(2)?
I am unable to run GetIf in order to do an SNMP walk becuase we've no servers with SNMP installed at our production location, and would rather not have to install it if at all possible because of security concerns... Does anyone know of a SNMP walking utility that contains it's own SNMP code like MRTG does? Any other suggestions of things to look at would be greatly appreciated. TIA! Frank Here is part of my cfg: Target[PIX01-1]: 1.3.6.1.4.1.9.9.109.1.1.1.1.4.1&1.3.6.1.4.1.9.9.109.1.1.1.1.5.1:[EMAIL PROTECTED] xip Options[PIX01-1]: gauge,nopercent,growright,nobanner,integer WithPeak[PIX01-1]: wmy YLegend[PIX01-1]: Util(percent) MaxBytes[PIX01-1]: 100 LegendI[PIX01-1]: CPU Usage (5 secs) LegendO[PIX01-1]: CPU Usage (1 min) Title[PIX01-1]: My PIX Unscaled[PIX01-1]: dwmy Legend1[PIX01-1]: CPU utilisation over 1 minute Legend2[PIX01-1]: CPU utilisation over 5 minute Legend3[PIX01-1]: Maximal CPU utilisation over 1 minute Legend4[PIX01-1]: Maximal CPU utilisation over 5 minute ShortLegend[PIX01-1]: % PageTop[PIX01-1]: <table width="100%" border="0"> <tr> <td><h2>Cisco CPU Utilisation Report</h2></td> </tr> <tr> <td><h3>PIX CPU</h3></td> </tr> <tr> <td><p>PIX :10.10.20.1</p></td> </tr> </table> Target[PIX01-2]: 1.3.6.1.4.1.9.9.48.1.1.1.5.1&1.3.6.1.4.1.9.9.48.1.1.1.6.1:[EMAIL PROTECTED] MaxBytes[PIX01-2]: 1024 Title[PIX01-2]: PIX 515E MEM PageTop[PIX01-2]: <H1>PIX01 MEM</H1> Options[PIX01-2]: gauge, nopercent, unknaszero YLegend[PIX01-2]: Bytes ShortLegend[PIX01-2]: Bytes Legend1[PIX01-2]: Free Legend2[PIX01-2]: Used Legend3[PIX01-2]: Max value per interval on graph Legend4[PIX01-2]: . LegendI[PIX01-2]: Free LegendO[PIX01-2]: Used Colours[PIX01-2]: GREEN#00eb0c,BLUE#0000ff,GRAY#AAAAAA,VIOLET#ff00ff WithPeak[PIX01-2]: ymw -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
