> Suggestions -- > 1) try running the script from the command line. Does it create a logfile? > If not, problem is with script.
Tried and yes the script is creating file. > 2) Check perl path is correct in script, and script has execute permission > (rwxr-xr-x) It is correct as tested from the command line. Execute permission given to all (chmod +x script.pl) > 3) Check permissions are correct for the MRTG user, ie, the user the script > will run as, not necessarily your own user. Both are same user (root). Owner and the MRTG user(I know its not recommended but i am going crazy with this problem) > 4) Usually it is recommended to put the Target[] line as the first > definition line for a given targetname Done. Regards Eswar New CFG File --------------- WorkDir: /root/etm/thar/data ThreshDir: /root/etm/thar/test Target[del-btnl-dsl]: -\GigabitEthernet0/3:[EMAIL PROTECTED]@61.95.250.3: Directory[del-btnl-dsl]: del-btnl-dsl SetEnv[del-btnl-dsl]: MRTG_INT_IP="202.56.235.249" MRTG_INT_DESCR="Serial3/1/6" MaxBytes[del-btnl-dsl]: 8500000 ThreshMaxI[del-btnl-dsl]: 30% ThreshProgI[del-btnl-dsl]: /root/etm/thar/testeri.pl Title[del-btnl-dsl]: Traffic Analysis for DEL-BTNL-DSL ON FIBER PageTop[del-btnl-dsl]: <H1>Traffic Analysis for BTNL-DEL ON FIBER FROM 234 </H1> <TABLE> <TR><TD>Description:</TD><TD>GigabitEthernet0/3; used; BTNL-DELHI DSL ON FIBER FROM 234 </TD></TR> <TR><TD>Max Speed:</TD> <TD>68 Mbits/s</TD></TR> <TR><TD>Ip:</TD> <TD>202.56.235.249 ()</TD></TR> </TABLE> -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
