I have a M20 with a POS OC-12 going to AT&T and the bandwith utl is about 350M - 400M, but MRTG is showing this to be 50M to 60M?
All of my other OC-12 and GE's read correct that are below 100M I tried it in RRDtools with 14all.cgi and that did not work either can someone help? See config below Target[so-2-1-0]: 82:[EMAIL PROTECTED]: SetEnv[so-2-1-0]: MRTG_INT_IP="adress" MRTG_INT_DESCR="so-0/3/0" MaxBytes[so-2-1-0]: 62200000 Title[so-2-1-0]: so-2/1/0 -- atlngacjp01-m20 PageTop[so-2-1-0]: <H1>so-2/1/0 -- atlngacjp01-m20</H1> <TABLE> <TR><TD>System:</TD> <TD>atlngacjp01-m20</TD></TR> <TR><TD>Maintainer:</TD> <TD>Ben </TD></TR> <TR><TD>Description:</TD><TD>OC-12 Connection to AT&T: CID</TD></TR> <TR><TD>ifType:</TD> <TD>sonet (39)</TD></TR> <TR><TD>ifName:</TD> <TD>so-2/1/0</TD></TR> <TR><TD>Max Speed:</TD> <TD>622.1 Mbits/s</TD></TR> <TR><TD>Ip:</TD> <TD> </TD></TR> </TABLE> -- Ben Lewellen ALLTEL-DataNOC Network Analyst (w)501-905-5005 (f)501-905-7001 (yahoo)blewell99 ****************************************************************************************** The information contained in this message, including attachments, may contain privileged or confidential information that is intended to be delivered only to the person identified above. If you are not the intended recipient, or the person responsible for delivering this message to the intended recipient, ALLTEL requests that you immediately notify the sender and asks that you do not read the message or its attachments, and that you delete them without copying or sending them to anyone else. -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
