I am monitoring several Nokia IPSOs with MRTG, using the OIDS listed on this group and some of the information from somix.com.
I found that some of the OIDS I wanted to get, like tcp connections / dropped / accepted, are only available in the Checkpoint MIB, and require that to be loaded on the IPSO. Like this one: 1.3.6.1.4.1.2620.1.1.4.0 This is _not_ the same as the Nokia snmp, which should be always loaded on the box. HTH, Don > > > > > > I don't think there are specific MIBs for IP300 and IP500. > > > The SNMP comes > > > with the IPSO and AFAIK, it has been unschanged since IPSO > > > 3.4.1-FCS11. Any > > > Nokia IP Security Platform running IPSO 3.4.1-FCS11 or later, > should > > > have the same MIB. > > > > > > Using LoadMIBs, I have loaded the HOST-RESSOURCES-MIB.txt and > HOST-RESSOURCES-TYPES.txt MIB files, that comes with net-snmp. Doing > a > snmpwalk on the Nokia IP Security Platform gives a quite clear > picture of > the common OIDs. > > However, if you look for the FW-1 specific OID's, I think you should > take a > look at Cricket with the Nokia provided branch. > > > > -- > Unsubscribe mailto:[EMAIL PROTECTED] > Archive http://www.ee.ethz.ch/~slist/mrtg > FAQ http://faq.mrtg.org Homepage http://www.mrtg.org > WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi > __________________________________ Do you Yahoo!? Yahoo! SiteBuilder - Free web site building tool. Try it! http://webhosting.yahoo.com/ps/sb/ -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
