On Thu, Feb 05, 2004 at 01:59:39PM -0500, Brian Basgen wrote: > Hello, > > I'm monitoring temperature in my server room, is there a "MinBytes" command > equivalent for the y axis? Thus, for example, the graph would have a fixed y > value starting at 50 degress going to the max of 100 degrees; thus providing > a more detailed graph than a zero value. The problem is that at present my > graphs go from 0 to 84 (1 degree higher than the peak recorded temperature), > and there is not enough detail to really see the changes over time. The > options in the cfg file are: > Options[tte14-temp]: growright,gauge,nopercent > > Or perhaps this can only be done with RRDtool?
RRDtool will handle this. In fact, without giving specific commands, it won't show 0 to 48 (or so). Rateup, your current workhorse, can't do this AFAIK. That is, without reprogramming. HTH Alex -- begin sig http://www.googlism.com/index.htm?ism=alex+van+den+bogaerdt&type=1 This message was produced without any <iframe tags -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
