Yes, that is, unfortunately, what I am finding. I will forward information I received from Cisco (see below). -Patricia
>>>received from Cisco>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> Hi Patricia, Good to be working with you on another TAC case. I'll be working with you on case F138535. Currently, you can monitor backplane utilization for CatOS switches using CISCO-STACK-MIB (http://www.cisco.com/warp/public/477/SNMP/cat-switch_backplane_util.html) You can also monitor the CPU utilization of 7500 routers using CISCO-PROCESS-MIB (http://www.cisco.com/warp/public/477/SNMP/collect_cpu_util_snmp.html#procmu lti) However, today, there is no way to monitor backplane utilization for a 7500 router. CSCdy58619 is a wish bug filed for this purpose. Here are the details: Externally found enhancement defect: New (N) need snmp oid / table for show controllers cbus utilization output Release Note A 7500 router returns: Router>sh controllers cbus utilization CY0Bus utilization for five seconds: 3%; one minute: 3%; five minutes: 3% CY1Bus utilization for five seconds: 0%; one minute: 0%; five minutes: 0% It is desired to have a table o be able to poll the above data via snmp. The bug may not be visible to you through our Bug Watcher tool. If you need resolution of the bug expedited, you may wish to contact your Cisco Account Team, or file a Product Enhancement. Please let me know if you have any follow-up questions. Regards, >>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>>> >>>>>>>>> ----- Original Message ----- From: "Chee Chew" <[EMAIL PROTECTED]> To: "Patricia A. Malinowski" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Monday, February 09, 2004 10:10 PM Subject: [mrtg] Re: Cybus OID > > I have confirmed this some where late last year that there isn't any mib for > this. Maybe the newer IOS could have covered this already, but most properly > not. > > > ----- Original Message ----- > From: "Patricia A. Malinowski" <[EMAIL PROTECTED]> > To: <[EMAIL PROTECTED]> > Sent: Tuesday, February 10, 2004 12:16 AM > Subject: [mrtg] Cybus OID > > > > Hi Everyone, > > I searched the archives, but onl found the question(s) posted and could > not find an answer, therefore, I'd like to send an inquiry, again, hope you > all don't mind (fingers-crossed). > > > > Does anyone know the OID for a Cisco 7513 cybus backplane AND the OID for > a Cisco 7507 cybus backplane? > > > > Thank you. > > > > -Patricia > > > > -- > > Unsubscribe mailto:[EMAIL PROTECTED] > > Archive http://www.ee.ethz.ch/~slist/mrtg > > FAQ http://faq.mrtg.org Homepage http://www.mrtg.org > > WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi > > > > > > -- > Unsubscribe mailto:[EMAIL PROTECTED] > Archive http://www.ee.ethz.ch/~slist/mrtg > FAQ http://faq.mrtg.org Homepage http://www.mrtg.org > WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi > > -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
