hi there ...
i wanna querry the Serial0/0 of a router and therefore i made an snmpwalk and
got the following OID's:
#.1.3.6.1.2.1.2.2.1.2.2 = Serial0/0
#.1.3.6.1.2.1.47.1.1.1.1.7.14 = "Serial0/0"
now i add this to my mrtg.cfg:
#Target[xxx]: 1.3.6.1.2.1.2.2.1.2.2:[EMAIL PROTECTED]
#MaxBytes[xxx]: 62000
#Title[xxx]: [EMAIL PROTECTED] ([EMAIL PROTECTED]): Serial0/0
#PageTop[xxx]: <H1>Traffic Analysis for Serial0/0
# </H1>
# <TABLE>
# <TR><TD>System:</TD><TD>[EMAIL PROTECTED] in </TD></TR>
# <TR><TD>Maintainer:</TD><TD>Me</TD></TR>
# <TR><TD>Interface:</TD><TD>Serial0/0</TD></TR>
# <TR><TD>IP:</TD><TD>[EMAIL PROTECTED]<TD></TR>
# <TR><TD>Max Speed:</TD>
# <TD> kBytes/s</TD></TR>
# </TABLE>
and get this error:
#ERROR: [EMAIL PROTECTED] '1.3.6.1.2.1.2.2.1.2. $$target[12]{$mode} ' evaluated
#to '967326837' instead of a number
#ERROR: [EMAIL PROTECTED] '1.3.6.1.2.1.2.2.1.2. $$target[12]{$mode} ' evaluated
#to '1847493040' instead of a number
#WARNING: Skipping Update of [EMAIL PROTECTED], inlast is not defined
#WARNING: Skipping Update of [EMAIL PROTECTED], outlast is not defined
one of my friends told me that this could be a problem with IOS 12.3 (this is
the first time we use this version of IOS) ... do you have any idea what i did
wrong ?
thx in advance,
markus
--
Unsubscribe mailto:[EMAIL PROTECTED]
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
