So I'm trying to monitor usage on my AS5800. I have a DS3 coming into it, but the way the phone company is setup they send me T1s over the DS3.. so my config looks something like this:
controller T1 1/0/0:1 framing esf fdl ansi ds0-group 0 timeslots 1-24 type e&m-fgb mf dnis description HC xxx-xxxx Laporte ! controller T1 1/0/0:2 framing esf fdl ansi ds0-group 0 timeslots 1-24 type e&m-fgb mf dnis description HC xxx-xxxx Liberty ! controller T1 1/0/0:3 framing esf fdl ansi ds0-group 0 timeslots 1-24 type e&m-fgb mf dnis description HC xxx-xxxx Towanda ! controller T1 1/0/0:4 framing esf fdl ansi ds0-group 0 timeslots 1-24 type e&m-fgb mf dnis description HC xxx-xxxx Wellsboro I've tried several different setups in MRTG to try to get it to monitor line usage but none of them seem to work. What OID do I need to use here? Normally I just poll total system usage to find capacity.. but in this case I have to poll each T1 individually. blah.. -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
