Greetings,
I've been trying to get the most recent version of MRTG (2.10.13) to
monior the DSL users on my Paradyne DSLAM DSL equipment and have been
running into troubles...
Some investigation has uncovered that you could use the following format
with MRTG v2.8.12:
[EMAIL PROTECTED]@IP
IE: [EMAIL PROTECTED]@192.168.1.253 (or possibally without the
first @
delimited)
that does not work with 2.10.13
----- output excerpt --------------------------
SNMP Error:
Received SNMP response with error code
error status: noSuchName
index 0
SNMPv1_Session (remote host: "xxx.xxx.xxx.xxx" [xxx.xxx.xxx.xxx].xxx)
community: "[EMAIL PROTECTED]"
request ID: 1210588935
PDU bufsize: 8000 bytes
timeout: 2s
retries: 5
backoff: 1)
at /usr/local/mrtg-2.9.22/bin/../lib/mrtg2/SNMP_util.pm line 458
--------------------------------------------------------------------------
looks like it's trying "[EMAIL PROTECTED]" as the community name.
Is this a known problem?
Does anyone know of a workaround?
I'd prefur not to run two instances of MRTG (2.8.12 to monior the DSLAMs,
the current version to monitor the routers and servers), can anyone offer
any other options?
Thanks,
Nejaa Halcyon
--
"Hackers and academics have uncovered one Windows security hole after
another, turning Microsoft into a frantic little Dutch boy at the dike
without enough fingers."
-- David Pogue, The New York Times
--
Unsubscribe mailto:[EMAIL PROTECTED]
Archive http://www.ee.ethz.ch/~slist/mrtg
FAQ http://faq.mrtg.org Homepage http://www.mrtg.org
WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
