Hi , I have this picture for my fastethernet link on the daily graph, and i have this on /etc/mrtg/cfg .... #Webserver Target[10.30.10.66_2]: 2:[EMAIL PROTECTED]: SetEnv[10.30.10.66_2]: MRTG_INT_IP="192.168.0.1" MRTG_INT_DESCR="eth0" MaxBytes[10.30.10.66_2]: 12500000 Title[10.30.10.66_2]: WebServer - Control de trafico de Interfaz ETH0 (Interna) PageTop[10.30.10.66_2]: <H1>WebServer - Control de Trafico Interfaz ETH0(Interna)</H1> <TABLE> <TR><TD>Sistema:</TD> <TD>www.noticiasargentinas.com </TD></TR> <TR><TD>Administrador:</TD> <TD>Jose Julian Buda <[EMAIL PROTECTED]> </TD></TR> <TR><TD>Descripcion:</TD><TD>eth0 </TD></TR> <TR><TD>ifType:</TD> <TD>ethernetCsmacd (6)</TD></TR> <TR><TD>ifName:</TD> <TD></TD></TR> <TR><TD>Max Velocidad:</TD> <TD>10.0 Mbits/s</TD></TR> <TR><TD>Ip:</TD> <TD>192.168.0.1 (serverna)</TD></TR> </TABLE> ...
How can i be sure that is the real trafic speed? , because it's a fastethernet nic linked to a switch(10/100) port and the max value registered( about 48 Kbps? ), not smell good , the form of the graphics is ok, because of the peoples come here to work about 8 AM and they go 1 AM , the problem is the value. I understand what this faq say ( http://faq.mrtg.org/FAQ014.html or http://faq.mrtg.org/FAQ019.html) What is the default value for the scale used? bits ? kbytes ? Its an snmp problem ? What am i missing? I used rd hat 70 and UCD-snmp 4.1.2 Thank you and sorry about my english Jose Julian Buda -- Attached file removed by Ecartis and put at URL below -- -- Type: image/png -- Size: 4k (4398 bytes) -- URL : http://www.ee.ethz.ch/~slist/p/10.30.10.66_2-day.png -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
