I've a follow situation that I hope that someone can help shedding some lights on it......my apology for the long post, I just want to ensure to include relevant info...
Background: Dell PowerEdge Windows 2000 SP4 server, Dell PowerEdge Windows NT4 SP6, MRTG v2.13, Active Perl v5.82.808 ( also tried MRTG v2.11, Active Perl 5.61...gave me same problem) Anyway, I've a couple Windows NT4 SP6 and Windows 2K SP4 servers. On one of the Windows 2000 Advanced server (member of existing domain), I was able to run MRTG to create MRTG.CFG file and *.pgn and *.html files were generated just fine....everything looked reallly good. Then I tried to run the same MRTG commands, using different server's ip addresses and work dir, on 2 NT4 servers, and 1 Win2000 Standard server, but somehow it didn't work after I executed the command: c:\mrtg11\bin\perl cfgmaker [EMAIL PROTECTED] --global "WorkDir: c\mrtg\data\gw10" --output mrtg.cfg .....gives the results..... --base: Get Device Info on [EMAIL PROTECTED] WARNING: Skipping [EMAIL PROTECTED]: as no info could be retrieved --base: Writing mrtg.cfg (shown below) # Created by # cfgmaker [EMAIL PROTECTED] --global 'WorkDir: c:\mrtgdata\gw10' --output mrtg.cfg ### Global Config Options # for UNIX # WorkDir: /home/http/mrtg # or for NT # WorkDir: c:\mrtgdata ### Global Defaults # to get bits instead of bytes and graphs growing to the right # Options[_]: growright, bits EnableIPv6: no ###################################################################### # System: # Description: # Contact: # Location: ###################################################################### WorkDir: c:\mrtgdata\gw10 ---------------------------------------------------------------------------------------------------------------------------------------------------- Things I've tried but it still didn't work: 1. installed and reinstalled SNMP service 2. verified that SNMP community is set to "public" with RO access 3. rebooted the server 4. tried MRTG from a different box using MRTG v2.10.11 with Active Perl v5.6.1 What else am I missing? Has anyone encountered the same issue before? Please help. Thank You. Hieu -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
