Here's the config I use to monitor our 5300's, it may be the same... Target[as5300-1]: 1.3.6.1.4.1.9.10.19.1.1.4.0&1.3.6.1.4.1.9.10.19.1.1.4.0:[EMAIL PROTECTED] YLegend[as5300-1]:Primary AS5300 ShortLegend[as5300-1]: users MaxBytes[as5300-1]: 96 Unscaled[as5300-1]: dwmy Options[as5300-1]: gauge, unknaszero, growright Title[as5300-1]: Primary AS5300 Users PageTop[as5300-1]: <H1><b>Primary AS5300 Active Users (888 Toll Free Lines)</H1> Legend1[as5300-1]: Active User Connections Legend2[as5300-1]: Legend3[as5300-1]: Max value per interval on graph Legend4[as5300-1]: LegendI[as5300-1]: Users LegendO[as5300-1]:
-----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bryan Decker Sent: Wednesday, May 05, 2004 11:42 AM To: [EMAIL PROTECTED] Subject: [mrtg] MRTG to measure call volumes I am trying to use MRTG to graph out some information for our dial-up gear. I have the correct OIDs (finally), but I'm not getting any data in my graphs. We have a Cisco AS5800 running IOS 12.2-16(a). The OIDs I'm looking at are: 1.3.6.1.4.1.9.9.47.1.1.7.0 1.3.6.1.4.1.9.9.47.1.1.6.0 The SNMP settings on the gear are correct, I believe. There are no errors on the cron-tab, and the graph page says it's updated. Any ideas on what I've done wrong? Thanks Bryan Bryan Decker Network and IP Engineer Smithville Telephone Company -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
