I use the command line cfgmaker to build the configs cfgmaker --ifref=nr --snmp-options=::1:1::2 --ifref=eth --ifref=descr
Michael Earls Systems Analyst, Information Services Cincinnati Children's Hospital Medical Center Phone: 513-636-5882 Phone: 1-800-344-2462 Pager: 513-303-8311 >>> Eric Brander <[EMAIL PROTECTED]> 5/12/2004 2:44:43 PM >>> Michael Earls wrote: >This is a start on 64 bit router > >http://people.ee.ethz.ch/~oetiker/webtools/mrtg/mrtg-reference.html > >SNMPv2c > If you have a fast router you might want to try to poll the ifHC* counters. This feature gets activated by switching to SNMPv2c. Unfortunately not all devices support SNMPv2c yet. If it works, this will prevent your counters from wraping within the 5 minute polling interval, since we now use 64 bit instead of the normal 32 bit. > > Example: > > Target[ezwf]: 2:[EMAIL PROTECTED]:::::2 > >michael > > > You can also add the SNMPv2 option when building a config using cfgmaker. Try: --snmp-options=:::::2 on the cfgmaker command line. That'd be the quickest way to find out if your switch supports HC counters. HTH, Eric Brander -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
