I hate to be a pest but I can't seem to get past this portion. After correcting the command line as was suggested I still end up with an SNMP error: C:\mrtg-2.10.13\bin>perl cfgmaker --snmp-options=:::::2 [EMAIL PROTECTED] <mailto:[EMAIL PROTECTED]> --global "workdir: c:\www\mrtg" --output mrtg.cfg --base: Get Device Info on [EMAIL PROTECTED]:::::2 <mailto:[EMAIL PROTECTED]:::::2> SNMP Error: no response received SNMPv2c_Session (remote host: "10.10.10.1" [10.10.10.1].161) community: "public" request ID: -669222043 PDU bufsize: 8000 bytes timeout: 2s retries: 5 backoff: 1) SNMPWALK Problem for 1.3.6.1.2.1.1 on [EMAIL PROTECTED]:::::2:v4only <mailto:[EMAIL PROTECTED]:::::2:v4only> WARNING: Skipping [EMAIL PROTECTED]:::::2 <mailto:[EMAIL PROTECTED]:::::2> as no info could be retrieved --base: Writing mrtg.cfg
Furthermore, the mrtg.cfg file created does not provide router interface numbers. Does anyone have any other suggestions? Thank you, AL Moreno 210.704.1563 ________________________________ From: Tobias Oetiker [mailto:[EMAIL PROTECTED] Sent: Tue 6/1/2004 3:36 PM To: Ana Moreno Subject: RE: your mail Today [EMAIL PROTECTED] wrote: > Tried it with the command as it should be ( C:\mrtg-2.10.13\bin>perl cfgmaker > -v 2c [EMAIL PROTECTED] --global "workdir: c:\www\mrtg" --output mrtg.cfg ) > but I still get the same response ( cfgmaker for mrtg-2.10.13 ) any other > ideas? this is the correct answert when you call it with option -v (as in --version) ... maybe you mean --snmp-options=:::::2 cheers tobi > Thank you, > AL Moreno > 210.704.1563 > > ________________________________ > > From: Tobias Oetiker [mailto:[EMAIL PROTECTED] > Sent: Tue 6/1/2004 2:56 PM > To: Ana Moreno > Subject: Re: your mail > > > > Today [EMAIL PROTECTED] wrote: > > > I am still stuck in the process of attempting to create the default > > mrtg.cfg file. Know I get the following when the command is entered. > > However, the mrtg.cfg file is not created. Any suggestions? > > > > C:\mrtg-2.10.13\bin>perl cfgmaker -v 2c [EMAIL PROTECTED] --global > > "workdir: c:\www\mrtg" --output mrtg.cfg > > cfgmaker for mrtg-2.10.13 > > > > Hi Al, > > it seems you are missing a " after c:\www\mrtg > > cheers > tobi > > Thank you, > > AL Moreno > > 210.704.1563 > > > > -- > ______ __ _ > /_ __/_ / / (_) Oetiker @ ISG.EE, ETZ J97, ETH, CH-8092 Zurich > / // _ \/ _ \/ / System Manager, Time Lord, Coder, Designer, Coach > /_/ \.__/_.__/_/ http://people.ee.ethz.ch/~oetiker +41(0)44-632-5286 > > > > -- ______ __ _ /_ __/_ / / (_) Oetiker @ ISG.EE, ETZ J97, ETH, CH-8092 Zurich / // _ \/ _ \/ / System Manager, Time Lord, Coder, Designer, Coach /_/ \.__/_.__/_/ http://people.ee.ethz.ch/~oetiker +41(0)44-632-5286 -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
