Hello all, I need some help here.. i'm quite newbie in mrtg. I want to use mrtg to monitor the traffic in my broadband router. I've been trying to install mrtg manually using the supplied documentation, but it hasn't work at all. I also tried MRTG bundle (2.01) but still end up the same. But when i use PRTG for windows, it works well... wonder what's the problem...
when i try to install the mrtg manually, i run the following command: > perl cfgmaker [EMAIL PROTECTED] --global "WorkDir: c:\www" --output mrtg.cfg and here's some part of the mrtg.cfg: ###################################################################### # System: # Description: Internet Gateway Device # Contact: # Location: ###################################################################### ### Interface 1 >> Descr: 'Ethernet-WAN' | Name: '' | Ip: '' | Eth: '00-0d-88-00-79-f5' ### ### The following interface is commented out because: ### * has a speed of 0 which makes no sense # # Target[192.168.1.1_1]: 1:[EMAIL PROTECTED]: # SetEnv[192.168.1.1_1]: MRTG_INT_IP="" MRTG_INT_DESCR="Ethernet-WAN" # MaxBytes[192.168.1.1_1]: 0 # Title[192.168.1.1_1]: Traffic Analysis for 1 -- # PageTop[192.168.1.1_1]: <H1>Traffic Analysis for 1 -- </H1> # <TABLE> # <TR><TD>System:</TD> <TD> in </TD></TR> # <TR><TD>Maintainer:</TD> <TD></TD></TR> # <TR><TD>Description:</TD><TD>Ethernet-WAN </TD></TR> # <TR><TD>ifType:</TD> <TD>ethernetCsmacd (6)</TD></TR> # <TR><TD>ifName:</TD> <TD></TD></TR> # <TR><TD>Max Speed:</TD> <TD>0.0 Bytes/s</TD></TR> # </TABLE> i've tried to erase the comment (#) for the interface, it didn't work. and when i try using mrtg bundle, i use documentation from http://www.webpronews.com/it/networksystems/wpn-21-20040507InstallingMRTGonaWindowsPlatform.html, still it didn't want to show any graph in http://localhost:9191 FYI, i want to monitor 1 router and 15 computer in my network. i've installed the SNMP service from Windows XP for the computer, and the router is DLINK 704P which has SNMP v1. The community name has been set to kos36public for the router and public for the computer. For the perl, i use ActivePerl 5.6.1 build 638. by the way, does anyone know how to uninstall mrtg bundle? and can i use mrtg to specifically monitor the traffic from every IP based on the destination? Thanks, BR -- ___________________________________________________________ Sign-up for Ads Free at Mail.com http://promo.mail.com/adsfreejump.htm -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
