The easiest way to chart the errors with 30 minute polling interval is just poll the normal 5 minute interval and suppress the 'daily' graph. The following line should do the trick: Suppress[your_target]: d
To graph the actual value of a counter and not the average you need to add 'gauge' at the options line for that counter. With low rates of errors the graphs will look like a sawtooth. An other way graph low rates is by using the perminute or perhour options. See the reference.html for details. Hth, Jan. -----Original Message----- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] Sent: Wednesday, June 16, 2004 8:06 PM To: [EMAIL PROTECTED] Subject: [mrtg] Errors I have the correct MIB's and stuff for my devices, What I would like to do is chart the errors at each polling about 30 minutes apart. I do not want to see averages, I want to see the actual amount of errors on the counters on my cisco equipment, How can I configure MRTG to do that? -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi Het ministerie van Sociale Zaken en Werkgelegenheid sluit elke aansprakelijkheid uit in verband met het niet juist, onvolledig of niet tijdig overkomen van de informatie in deze e-mail. Aan dit bericht kunnen geen rechten worden ontleend. Dit bericht is alleen bestemd voor de geadresseerde. Indien dit bericht niet voor u bestemd is, verzoeken wij u dit onmiddellijk aan ons te melden en de inhoud van het bericht te vernietigen. ___________________________________________________________________________________________________________________________________________________ The ministry of Social Affairs and Employment is not liable for any incorrect or incomplete transmission of the information in this e-mail or for any delay in its receipt. This message shall not constitute any obligations. This message is intended solely for the addressee. If you have received this message in error, please inform us immediately and delete its content. -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
