Meng Keng Lee wrote: > Hello Eric, > Below is my MRTG configuration: > Target[A2RT01.Fa4_0_0.load]: #Fa4/0/0:[EMAIL PROTECTED]: > SetEnv[A2RT01.Fa4_0_0.load]: MRTG_INT_IP="192.168.130.250" MRTG_INT_DESCR="" > Directory[A2RT01.Fa4_0_0.load]: A2RT01 > YLegend[A2RT01.Fa4_0_0.load]: Link Utilization > #kilo[A2RT01.Fa4_0_0.load]: 1024 > #ShortLegend[A2RT01.Fa4_0_0.load]: bps > Legend1[A2RT01.Fa4_0_0.load]: Utilizaiton (In) > Legend2[A2RT01.Fa4_0_0.load]: Utilization (Out) > Legend3[A2RT01.Fa4_0_0.load]: > Legend4[A2RT01.Fa4_0_0.load]: > LegendI[A2RT01.Fa4_0_0.load]: In Utilization: > LegendO[A2RT01.Fa4_0_0.load]: Out Utilization: > #Unscaled[A2RT01.Fa4_0_0.load]: ywmd > MaxBytes[A2RT01.Fa4_0_0.load]: 12500000 > Options[A2RT01.Fa4_0_0.load]: growright,bits,nopercent > ThreshMaxi[A2RT01.Fa4_0_0.load]:70
Try appending a % to the 70. > ThreshProgI[A2RT01.Fa4_0_0.load]:e:\mrtg\bin\thresholdalert.pl > ThreshProgOKI[A2RT01.Fa4_0_0.load]:e:\mrtg\bin\thresholdalert.pl > ThreshMaxO[A2RT01.Fa4_0_0.load]:70 Ditto. Line should look like this: ThreshMaxO[A2RT01.Fa4_0_0.load]:70% > ThreshProgO[A2RT01.Fa4_0_0.load]:e:\mrtg\bin\thresholdalert.pl > ThreshProgOKO[A2RT01.Fa4_0_0.load]:e:\mrtg\bin\thresholdalert.pl > Title[A2RT01.Fa4_0_0.load]: A2RT01 #Fa4/0/0 Link Utilization > PageTop[A2RT01.Fa4_0_0.load]: <H1>A2RT01 #Fa4/0/0 Link Utilization</H1> > <TABLE> > <TR><TD>System:</TD> <TD>A2RT01 in </TD></TR> > <TR><TD>Maintainer:</TD> <TD></TD></TR> > <TR><TD>Description:</TD><TD> </TD></TR> > <TR><TD>ifType:</TD> <TD>ethernetCsmacd (6)</TD></TR> > <TR><TD>ifName:</TD> <TD>Fa4/0/0</TD></TR> > <TR><TD>Max Speed:</TD> <TD>100.000 Mbits/s</TD></TR> > <TR><TD>Ip:</TD> <TD>192.168.130.250 ()</TD></TR> > </TABLE> > > Am I correct to say that my perl script will work if it hits above 70% of the > Input and Output Utilisation? > > Thanks for your help ~snip~ That should do it. Eric Brander -- Unsubscribe mailto:[EMAIL PROTECTED] Archive http://www.ee.ethz.ch/~slist/mrtg FAQ http://faq.mrtg.org Homepage http://www.mrtg.org WebAdmin http://www.ee.ethz.ch/~slist/lsg2.cgi
